EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Aluminum Products
Aluminum Products
Our organization is counted among the trusted enterprises that are offering Aluminum Products. These products are offered by us in the form of Round Hexagonals, Squares, Rods, Tubes, Sheets, Strips, Foils, Bus Bars, Plate, Flats, Wire, Tubings, Sections & Bushes. The products we offer are acknowledged in the market for their features like durability, dimensional stability, resistance to rust and high tensile strength.
Aluminium Sheet 6061
Product Price: Rs 300 / KilogramGet Best Price
Product Details:
| Size | 1/2 inch, 3/4 inch, 2 inch, 1 inch, 3 inch |
| Unit Pipe Length | 6 meter, 3 meter |
| Type | Coil, Plate |
| Height | Min 0.5' (12.7 mm) To Max. 1' (25.4 mm) (depending On the Basic |
Aluminium Alloy 6061
Typical composition of aluminium alloy 6061
Component | Amount (wt.%) |
Aluminium | Balance |
Magnesium | 0.8-1.2 |
Silicon | 0.4 – 0.8 |
Iron | Max. 0.7 |
Copper | 0.15-0.40 |
Zinc | Max. 0.25 |
Titanium | Max. 0.15 |
Manganese | Max. 0.15 |
Chromium | 0.04-0.35 |
Others | 0.05 |
Key Properties
Typical properties of aluminium alloy 6061 include:
• Medium to high strength
• Good toughness
• Good surface finish
• Excellent corrosion resistance to atmospheric conditions
• Good corrosion resistance to sea water
• Can be anodized
• Good weldability and brazability
• Good workability
• Widely available
Note: Property data is provided below, but should be used a guide only. As data may vary between manufacturers, you should consult your supplier for more exact figures.
Physical PropertiesDensity: 2.7 g/cm3
Melting Point: Approx 580°C
Modulus of Elasticity: 70-80 GPa
Poissons Ratio: 0.33
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Get Best QuoteRequest A Callback
5052 Aluminum Alloy
Product Price: Rs 225 / KilogramGet Best Price
Leveraging to our wide distribution network, we are able to offer our clients a dimensionally accurate range of 5052 Aluminum Alloy.Having excellent finishing properties, our offered 5052 is referred as anodize quality aluminum. Good resistance to corrosion, especially in salt-water/marine atmospheres, these alloys offered by us are highly applauded in the market.
Other Details:
Machinability and Weldability:
Heat Treating:
5052-H32 Conforms to:
Applications:
Other Details:
- Anodized coatings are bright and clear
- The major alloying element in 5052 is magnesium in sufficient quantities
- Cause substantial lowering of the melting point
- Do not produce brittleness
- 5052 is far stronger than the 1100 or 3000 series aluminium
- Forms with reasonable bend radii
- 90 degree cold bend radius (for .064" thick): 1T The above values are average and may be considered as representative of 5052-H32 applications.
Machinability and Weldability:
- 5052-H32 has a machinability rating of 88% when compared to 2011 at 100%.
- 5052-H32 can be readily welded using all the common welding techniques. 5052 has the best welding characteristics of all the aluminiums.
Heat Treating:
- 5052 is not heat treatable debility is very good
5052-H32 Conforms to:
- ASTM BB209
- QQ-A-250/8
- AMS 4015
- AMS 4016
- AMS 4017
Applications:
- For cooking utensils
- Food processing equipment
- Storage tanks
- Truck and trailer components
- Mail boxes
- Aircraft components
- Electronic chassis
- Boat hulls
- Deck houses
- Hatch covers
- Pressure vessels
- Ladders
- Railings
- Frames
- Drip pans
- Tool boxes
- Truck bumpers
- Inner and outer body panels and components in truck
- Auto industries
- Kitchen equipment
- Decorative trim
- Architectural uses
- Sign-age applications
Get Best QuoteRequest A Callback
2014 Aluminum Alloy
Product Price: Rs 400 / KilogramGet Best Price
Being a client-centric organization, we are engaged in manufacturing, supplying and exporting a comprehensive range of 2014 Aluminum Alloy. Manufactured at our sophisticated infrastructure unit, the aluminum alloy offered by us is highly applauded for their features like low maintenance, dimensional accuracy and high tensile strength. Further, our appointed quality controllers closely inspect our range on different parameters to ensure flawlessness.
Features:
Applications:
Physical Properties:
Mechanical Properties:
Forms & shapes:
Features:
- Precipitation hardening alloy with good strength after heat treatment
Applications:
- To manufacture of aircraft structures and truck frames
Physical Properties:
- Electrical conductivity 33% of copper
Mechanical Properties:
- Shear strength: O (annealed) temper 18 KSI
- T4 temper 38 KSI
- T6 Temper 42 KSI
Forms & shapes:
- Wire
- Sheet
- Plate
- Strip
- Round bars
- Hexagonal
- Flats
- Square
- Angle
- Channel
- Blanks
- Tubes
- Billets
- Pipes
- Pipe fittings
- Forging rings
- Special shape forgings
- Fasteners
Chemistry Data:
Aluminum | Balance |
Chromium | 0.1 max |
Copper | 3.9 - 5 |
Iron | 0.7 max |
Magnesium | 0.2 - 0.8 |
Manganese | 0.4 - 1.2 |
Remainder Each | 0.05 max |
Remainder Total | 0.15 max |
Silicon | 0.5 - 1.2 |
Titanium | 0.15 max |
Titanium + Zinc | 0.2 max |
Zinc | 0.25 max |
Get Best QuoteRequest A Callback
6061 Aluminum Flat
Product Price: Rs 250 / KilogramGet Best Price
Product Details:
| Anodised | No |
Features:
- Excellent joining characteristics
- Good acceptance of applied coatings
- Combines relatively high strength
- Good workability
- High resistance to corrosion
- Type - Flat Bars
- Material - Aluminium
- Size - Customised
Get Best QuoteRequest A Callback
6082 Aluminum Alloy Plate
Product Price: Rs 260 / KilogramGet Best Price
Owing to our excellent working force, we bring forth for our clients an exclusively manufactured range of 6082 Aluminum Alloy. Applicable in aircraft fittings, couplings, camera lens mounts, electrical fittings & connectors, decorative or misc, marines fittings & hardware, hinge pins, brake pistons, hydraulic pistons, magneto parts, appliance fittings and bike frames, our offered alloys are widely demanded by various industries. Further, the alloy 6082 offered by us is manufactured in tandem with industry set guidelines.
Specifications:
Composition Notes:
Material Notes:
Specifications:
- Al: 95.8 - 98.6 %
- Cr:0.04 - 0.35 %
- Cu: 0.15 - 0.4 %
- Fe: Max 0.7 %
- Mg: 0.8 - 1.2 %
- Mn: Max 0.15 %
- Other, each: Max 0.05 %
- Other, total: Max 0.15 %
- Si: 0.4 - 0.8 %
- Ti: Max 0.15 %
- Zn: Max 0.25 %
- Electrical Resistivity: 3.99e-006 ohm-cm
- Solution Temperature: 529 °C, 985 °F
- Aging Temperature: 160 °C, 320 °F Rolled or drawn products; hold at temperature for 18 hr
- Aging Temperature: 177 °C, 350 °F Extrusions or forgings; hold at temperature for 8 hr
Composition Notes:
- Aluminum content reported is calculated as remainder
- Composition information provided by the Aluminum Association
- It is not for design
Material Notes:
- Excellent joining characteristics
- Good acceptance of applied coatings
- Combines relatively high strength
- Good workability
- High resistance to corrosion
- The T8 and T9 tempers offer better chipping characteristics
- Excellent joining characteristics, good acceptance of applied coatings
- Combines relatively high strength, good workability, and high resistance to corrosion; widely available
- The T8 and T9 tempers offer better chipping characteristics over the T6 temper
- Data points with the AA note have been provided by the Aluminum Association, Inc. and are not for design
Get Best QuoteRequest A Callback
Aluminium Busbar
Product Price: Rs 200 / KilogramGet Best Price
Product Details:
| Anodised | No |
Applications:
- Commonly used in the manufacture of furniture, windows, stair rails, and in pipe railing
- Commonly used in architectural extrusions
- 6063 aluminum bar is used for extruded and formed parts that can combine support with decoration
- It is used for trim, decorative screens and grates and ornamental frames and supports
Specifications:
- Ultimate Tensile Strength, psi: 27,000
- Yield Strength, psi: 21,000
- Hardness: 60
- Chromium: 0.1 max
- Copper: 0.1 max
- Iron: 0.35 max
- Magnesium: 0.45 - 0.9
- Manganese: 0.1 max
- Remainder Each: 0.05 max
- Remainder Total: 0.15 max
- Silicon: 0.2 - 0.6
- Titanium: 0.1 max
- Zinc: 0.1 max
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Get Best QuoteRequest A Callback
6061 Aluminum Alloy Plates
Product Price: Rs 350 / KilogramGet Best Price
Product Details:
| Thickness | 0.50 MM TO 500 MM |
| Grade | 6061 T6 |
| Size | 0.50 MM TO 500 MM THICK |
| Composition | 6061 T6 ALLOY |
| Finish | MILL FINISH |
| Usage/Application | AEROSPACE, ENGINEERING, ETC |
Applications Areas:
- Used for structural components
- Frames
- Brackets
- Jigs
- Fixtures
- Base plates
- Machine parts
- Hydraulic valve bodies
- Valves parts
- Fuse parts
- Gears
- Worm gears
- Rectifier parts
- Fasteners
- Truck and marine components
- Marine fittings and hardware
- Electrical fittings and connectors
- Hinge pins
- Magneto parts
- Appliance fittings
- Camera lens mounts
Heat treatment:
- Solution heat treat at 990°F for adequate time to allow for thorough heating and then water quenched
- Precipitation hardening is done at 320°F for 18 hours and air cool
- Followed by 350°F for 8 hours and air cooled
Specifications:
- Mach-inability: Mach-inability rating of 90%
- Finish: High finish
- 6061 temperatures: 750° to 900°F
- Hot working temperature: 500°F to 700°F
Additional Information:
- Delivery Time: 7 DAYS/ READY STOCK
Get Best QuoteRequest A Callback
5086 Aluminum Alloy Sheet
Product Price: Rs 450 / KilogramGet Best Price
Product Details:
| Material | Aluminum Alloy |
| Color | Silver |
| Shape | Rectangular |
| Is It Anodised | Not Anodised |
| Alloy Or Not | Is Alloy |
We are engaged in providing our clients with a quality-assured range of 5086 Aluminum Alloy. Precision-engineered, our offered aluminum alloy is manufactured utilizing quality approved raw material and other basic components that are sourced from reliable vendors of the industry. Further, our offered products are manufactured in adherence with the international standards of quality.
Features:
- High tensile strength
- Low maintenance
- Dimensional accuracy
- High ductility
- Type - Alloy Sheet
- Material - Aluminium
- Size - Customised
Additional Information:
- Delivery Time: 30 - 60 DAYS
Get Best QuoteRequest A Callback
Aluminum Rods
Product Price: Rs 200 / KilogramGet Best Price
We hold specialization in offering a gamut of Aluminum Rods. Developed using optimum aluminum as per international quality norms, these products are offered by us in varied length, diameter and grades. Customers can also avail customized version of these rods from us as per the specifications detailed by them.
Features:
- Perfect finish
- High tensile strength
- Longer service life
Get Best QuoteRequest A Callback
Aluminium Strips
Product Price: Rs 205 / KilogramGet Best Price
Owing to the technologically advanced vendors, we have been able to offer a gamut of Aluminum Strips. These are manufactured using aluminum wires with employing latest machines and tools. Available in varied standard sizes and grades, these strips we offer are widely used to make engine sheets. Further, we charge reasonable rates for providing these products to the patrons.
Features:
- Rustproof
- Dimensionally stable
- Fine finish
Get Best QuoteRequest A Callback
Aluminium Sheets
Product Price: Rs 200 / KilogramGet Best Price
Owing to the rich experience and knowledge of this domain, we have been able to offer premium quality Aluminium Sheets to our valuable customers. These sheets are manufactured from stainless stain metal formed by an industrial process into thin and flat pieces. The offered products are widely used in different industrial applications where high temperature and pressure is encountered. In addition to this, our customers can avail these sheets in different sizes, shapes, and thickness.
Features:
Features:
- Lightweight, with smooth finish and defined edges
- General purpose material
- Excellent candidate for most processing techniques
- Good corrosion resistance
- Excellent at resisting moisture and strong for its light weight
Get Best QuoteRequest A Callback
Aluminum Round
Product Price: Rs 200 / KilogramGet Best Price
We are manufacturer and exporter of Aluminum Round. Our highly experienced procuring agent ensures that these Aluminum Round are sourced from trusted vendors. These products are widely used in chemical field and petrifaction field and especially suit the high temperature and pressure environment.
Features:
Features:
- Excellent joining characteristics
- Good acceptance of applied coatings
- Combines relatively high strength
- Good workability
- High resistance to corrosion
Get Best QuoteRequest A Callback
Aluminum Rods
Product Price: Rs 200 / KilogramGet Best Price
We hold specialization in offering a gamut of Aluminum Rods. Developed using optimum aluminum as per international quality norms, these products are offered by us in varied length, diameter and grades. Customers can also avail customized version of these rods from us as per the specifications detailed by them.
Features:
- Perfect finish
- High tensile strength
- Longer service life
Get Best QuoteRequest A Callback
Aluminium Plate 7075
Product Price: Rs 650 / KilogramGet Best Price
Product Details:
| Size | All |
| Grade | 7075 T6 |
| Thickness | 0.8 mm to 500 mm |
| Material | Aluminium |
| Shape | Rectangular, Square, Round |
| Alloy | With Alloy |
| Is It Anodized | Non Anodized |
| Condition | New |
Aluminum alloys have strong corrosion resistance. At subzero temperatures, their strength increases, thus making them a useful low-temperature alloy. Their strength decreases if they are subjected to very high temperatures. The aluminum 7075 alloy has high strength.
The following datasheet gives more details about the aluminum 7075 alloy.
Chemical CompositionThe following table shows the chemical composition of the aluminum 7075 alloy.
| Element | Content (%) |
|---|---|
| Aluminum, Al | 90 |
| Zinc, Zn | 5.6 |
| Magnesium, Mg | 2.5 |
| Copper, Cu | 1.6 |
| Chromium, Cr | 0.23 |
The physical properties of aluminum 7075 alloy are tabulated below.
| Properties | Metric | Imperial |
|---|---|---|
| Density | 2.8 g/cm3 | 0.101 lb/in3 |
| Melting point | 483°C | 900°F |
The mechanical properties of aluminum 7075 alloy are outlined in the following table.
| Properties | Metric | Imperial |
|---|---|---|
| Tensile strength | 220 MPa | 31909 psi |
| Yield strength | 95 MPa | 13779 psi |
| Shear strength | 150 MPa | 21756 psi |
| Fatigue strength | 160 MPa | 23206 psi |
| Elastic modulus | 70-80 GPa | 10153-11603 ksi |
| Poisson's ratio | 0.33 | 0.33 |
| Elongation at break | 17% | 17% |
| Hardness | 60 | 60 |
The thermal properties of aluminum 7075 alloy are given in the following table.
| Properties | Conditions | ||
|---|---|---|---|
| T (ºC) | Treatment | ||
| Thermal expansion | 23.2 (10-6/ºC) | 20-100 | - |
| Thermal conductivity | 130 W/mK | 25 | T6 |
Other designations that are equivalent to aluminum 7075 alloy include:
| AMS 4044 | ASTM B209 | ASTM B468 | QQ A-200/15 |
| AMS 4045 | ASTM B210 | DMS 2233 | QQ A-225/9 |
| AMS 4049 | ASTM B211 | MIL A-12545 | QQ A-250/13 |
| AMS 4131 | ASTM B221 | MIL A-22771 | QQ A-250/24 |
| AMS 4147 | ASTM B241 | MIL F-18280 | QQ A-367 |
| AMS 4154 | ASTM B247 | MIL F-5509 | QQ A-430 |
| AMS 4323 | ASTM B316 | QQ A-200/11 | QQ WW-T-700/7 |
| SAE J454 |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
- Delivery Time: Ready stock/7 days
Get Best QuoteRequest A Callback
Aluminium Flat Bar
Product Price: Rs 200 / KilogramGet Best Price
Product Details:
| Anodised | No |
| Dimensions (l x b x h) | Standard |
| Yield | 35 |
| Surface Treatment | Polished |
We are one of the best Manufactures ,exporters and suppliers of Aluminum Flat Bar, which are highly appreciated for their high durability. Available in several thickness, sizes and shapes, these flats are made from high quality metals and we source them from the authentic and reliable vendors of the competitive market. Our products are provided for automobile, construction as well as engineering industries and these are available within prompt time period to the clients.
Application Areas:
- Petrochemicals plants
- Power plants
- Printing companies
- Fertilizer plants
Features:
- Corrosion resistance
- Excellent mechanical properties
- Dimensional tolerance
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Get Best QuoteRequest A Callback
2024 Aluminum Alloy
Product Price: Rs 400 / KilogramGet Best Price
Product Details:
| Type | Sheet |
| Grade | 2024 |
| Surface Treatment | Coated |
| Shear strength | O (annealed) temper 18 KSI |
Features:
- High strength aluminum screw machine stock alloy
- Typical tensile strengths in the T351 and T4 temper equal
Application Areas:
- Fasteners Etc.
- Aircraft fittings and structures
- Computer parts
- Gears
- Shafts
- Hinge pins
- Valve blocks and valve parts
- Bolts
- Nuts
- Fasteners
- Truck parts
- Brake components
- To manufacture of aircraft structures and truck frames
Machining of Aluminum Alloy 2024:
- Alloy 2024 offers good machinability when machined using single-point
- Multi-spindle carbide tools on Screw Machines
- The use of a chip breaker is recommended
Anodizing:
- Anodizing response is rated moderate for the alloy
- Alloy 2024 can accept all types of anodic coatings
Principal design features:
- Precipitation hardening alloy with good strength after heat treatment
Other Physical Properties:
- Electrical conductivity 33% of copper
Other Mechanical Properties:
- Shear strength: O (annealed) temper 18 KSI
- T4 temper 38 KSI
- T6 Temper 42 KSI
Forms & Shapes:
- Wire
- Sheet
- Plate
- Strip
- Round bars
- Hexagonal
- Flats
- Square
- Angle
- Channel
- Blanks
- Tubes
- Billets
- Pipes
- Pipe fittings
- Forging rings
- Special shape forgings
- Fasteners
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Get Best QuoteRequest A Callback
Aluminum Tread Plate
Product Price: Rs 200 / KilogramGet Best Price
Product Details:
| Size | 2Inch, 3Inch, 4Inch |
| Color | Sliver |
| Application | Refrigerators, air conditioners, cars, packaging pipes. |
| Grade | 1050,1060,1100,3003.3105 ,5052,5083 |
This highly reflective, an economical product is widely used in decorative, cosmetic and architectural applications. Having good forming, drilling and welding ability, Aluminum Diamond Plate is easy to fabricate and its raised diamond lug pattern provides good slip resistance.
Features:
- High durability
- Flexibility
- Weld consistency
- Superior finish
- Corrosion resistance
Get Best QuoteRequest A Callback
6063 Aluminum Square Bar
Product Price: Rs 200 / KgGet Best Price
Product Details:
| Anodised | No |
Features:
- This is generally considered to be an extrusion alloy that is heat treatable for strengthening
- Aluminum bar is an extruded aluminum product available flat, square or rounded
- Bar is used for stamping, casting or machining a finished product
- Aluminum’s anti-corrosion, high strength, low weight and thermal conductive properties are useful for support, structural and high heat applications
- 6063 aluminum bar is known primarily as an architectural grade of aluminum due to its attractive, smooth finish
- It exhibits the same strength, light weight and anti-corrosion properties as other grades
- 6063 aluminum is also easy to form, extrude and weld, making it a good material for custom decorative components
- Anodizing increases its corrosion-resistance for exposed products
- 6063 T-52 is an aluminum alloy, with magnesium and silicon as the alloying elements
- Generally, it has good mechanical properties and is heat treatable and weldable
- 6063 is mostly used in extruded shapes for architecture, particularly window frames, door frames, and roofs
- It is typically produced with very smooth surfaces fit for anodizing
- It displays very good corrosion resistance, medium fatigue strength and good cold formability
Applications:
- Commonly used in the manufacture of furniture, windows, stair rails, and in pipe railing
- Commonly used in architectural extrusions
- 6063 aluminum bar is used for extruded and formed parts that can combine support with decoration
- It is used for trim, decorative screens and grates and ornamental frames and supports
Specifications:
- Ultimate Tensile Strength, psi: 27,000
- Yield Strength, psi: 21,000
- Hardness: 60
- Chromium: 0.1 max
- Copper: 0.1 max
- Iron: 0.35 max
- Magnesium: 0.45 - 0.9
- Manganese: 0.1 max
- Remainder Each: 0.05 max
- Remainder Total: 0.15 max
- Silicon: 0.2 - 0.6
- Titanium: 0.1 max
- Zinc: 0.1 max
- Thicknesses: 0.1875" to 4.5"
- Widths: up to 6"
- Diameter: 0.1875" to 12.125"
- Sizes: 0.375" to 6"
Get Best QuoteRequest A Callback
6061 Aluminum Square Bar
Product Price: Rs 220 / KilogramGet Best Price
Product Details:
| Anodised | No |
Features:
- Lightweight, with smooth finish and defined edges
- General purpose material
- Excellent candidate for most processing techniques
- Good corrosion resistance
- Excellent at resisting moisture and strong for its light weight
Applications Areas:
- Brackets, Bracing, Key stock, Ornamental
Specifications:
- Brinell: 95
- Tensile: 45,000 +/-
- Yield: 40,000 +/-
- Sizes: 2ft, 4ft, 6ft, 8ft, 12ft
- Thicknesses: 0.250 inch (6.35 mm)
- Tensile strength: 42,000 psi (290 MPa)
Get Best QuoteRequest A Callback
Aluminium Threaded Rod
Product Price: Rs 120 / PieceGet Best Price
We are one of the leading manufacturers, suppliers, and exporters of high grade Aluminium Threaded Rod. These products are ideal for aerospace and marine applications. The products, offered by us are precisely engineered from high quality material, which is obtained from trusted vendors. Driven by an intense desire to attain maximum clients’ satisfaction, our logistic professionals assure effective and safe delivery of these rods.
Features:
Features:
- Lightweight, with smooth finish and defined edges
- General purpose material
- Excellent candidate for most processing techniques
- Good corrosion resistance
- Excellent at resisting moisture and strong for its light weight
Get Best QuoteRequest A Callback
Aluminium Circle
Product Price: Rs 300 / KilogramGet Best Price
Product Details:
| width | 50-1200mm |
| Al Content (%) | 99.95 |
| Type | Circle/Disc |
| Surface Treatment | Bright |
Get Best QuoteRequest A Callback
Header Pipe
Product Price: Rs 240 / KilogramGet Best Price
Among our wide range of products, we are providing a premium quality assortment of Header Pipe.
Features:
Features:
- Elevated durability
- Sturdiness
- Easy to fit
Get Best QuoteRequest A Callback
5083 Aluminum Alloy
Product Price: Rs 250 / KilogramGet Best Price
Minimum Order Quantity: 1 Kilogram
Product Details:
| Grade | AA5083 |
| Shape | Rectangular |
| Color | Gray |
| Material Grade | 5083 |
Features:
- AL 2219 is an age-hard enable copper containing alloy of aluminum
Applications:
- Commonly used in the manufacture of structural components
- Used in high temperature applications as well as high strength amendments
Mach-inability:
- In the annealed condition this alloy is readily machined
Forming:
- The alloy may be readily formed by conventional methods
Welding:
- Welding heat input affects the corrosion resistance of this alloy in an adverse manner
Heat treatment:
- Solution heat treatment is done at 1000 F
- Followed by a cold water quench (T4 condition)
Forging:
- Hot forging may be done providing the finished product is given
- The aging heat treatment to restore corrosion resistance
Hot working:
- Hot working should be avoided unless it is feasible to give the finished product
- The aging heat treatment after all hot working is done
Cold working:
- Cold working by conventional means is readily accomplished
Annealing:
- Solution annealing is done at 1000 F for adequate time to allow thorough heating, followed by a cold water quench
Hardening:
- This alloy is hardened (strengthened) by an aging heat treatment
- By controlled cold working from the solution annealed condition
Other Physical Props:
- Electrical conductivity 30% that of copper
Physical data:
- Density (lb/cu. in.): 0.103
- Specific gravity: 2.84
- Melting point (Deg F): 950
- Modulus of elasticity tension: 10.6
Get Best QuoteRequest A Callback
Aluminium Pipes
Product Price: Rs 200 / KilogramGet Best Price
Product Details:
| Shape | Rectangular, Round, Square |
| Size | 4 |
| Surface Finish | Mill Finished |
| Grade | 3000 Series, 1000 Series, 2000 Series, 4000 Series |
| Alloy Or Not | Is Alloy, Non Alloy |
Customers can avail from us a wide and remarkable range of Aluminum Tubes. These are developed as per the guidance of experienced quality analyzers in accordance with industry laid norms and guidelines. Before the final dispatch, a team of strict quality inspectors examine these tubes on varied parameters to ensure their defect-free nature.
Features:
- Resistance to abrasion
- Ability to withstand high temperature
- Highly durable
Get Best QuoteRequest A Callback
Aluminium Wire
Product Price: Rs 200 / KgGet Best Price
Available with us is a remarkable range of Aluminum Wires. All our products are manufactured using superior quality raw material, which we source from reliable vendors of the market. Patrons can avail these wires from us in variegated sizes, grades and thicknesses as per their requirements.
Features:
- High tensile strength
- Longer life
- Excellent ductile strength
Get Best QuoteRequest A Callback
Aluminium Alloy Bar
Get Latest Price
Product Details:
| Is It Anodised | Not Anodised |
Additional Information:
- Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
Get Best QuoteRequest A Callback
Aluminum Studs
Product Price: Rs 5 / PieceGet Best Price
Product Details:
| Quantity Per Pack | 100 |
Specifications:
- Type - Studs
- Material - Aluminium
- Size - Customised
Get Best QuoteRequest A Callback